The functional features in the water cutting process are as follows:
(1) The computer is separated from the machine tool, and the computer independently detects whether the water cutting processing program is closed;
(2) The closed precision of machining program is controlled within 0.003mm;
(3) If the detection and processing program is not closed, the programmer can judge how much more or less to walk in X direction or Y direction, and how much or less to walk according to the error result displayed on the display. With this money point, the programmer can quickly find out the position of the wrong water cutting processing program section;
(4) Whether the program of water cutting is closed quickly or not is detected by computer alone. No matter how long the straight line section is, the time of computer detection is very short, which improves the effective utilization rate of machine tool. This function is easy to operate and display;
(5) The function of detecting and sealing the water cutting program inserted into the CNC machine tool only has special consideration for the software system, and the hardware system has no change, which is a function of increasing benefit without spending money. It has been proved that this function has a certain value in production. Our company has successively promoted the use of 7 sets of micro-control WEDM machine tools.